CBNMX - INTERIOR QUICK DRY SANDING SEALER, 01042/1-42
- MSDS: CBNMX
- Manufacturer: MCCORMICK PAINTS
- Product Name: INTERIOR QUICK DRY SANDING SEALER, 01042/1-42
- National Stock Number: 8010-00N071289
Product Identification
Product ID:INTERIOR QUICK DRY SANDING SEALER, 01042/1-42
MSDS Date:12/15/1993
FSC:8010
NIIN:00N071289
MSDS Number: CBNMX
Responsible Party
ROCKVILLE, MD 20851
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 301-770-3235
Cage: 0EKH6
Contractor
Telephone: 301-770-3235
Cage: 0EKH6
Ingredients
30 @ 10F
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 65%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:HEADACHE, DIZZINESS, NAUSEA, EYE
IRRITATION. CHRONIC:LOSS OF APPETITE, NOSE BLEEDS. REPORTS HAVE
ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL OVEREXPOSURE TO
SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN CONTACT:PROLONGED OR REPEATED
LIQUID CONTACT WILL DRY AND DEFAT SKIN LEADING TO IRRITATION AND
DERMATITIS. EYE CONTACT:DIRECT EYE CONTACT WILL CAUSE EYE
IRRITATION.
First Aid
First Aid:SKIN:WASH WITH SOAP AND WATER. EYE:IMMEDIATELY FLUSH EYES
WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES; CALL A PHYSICIAN.
INGESTION:DO NOT INDUCE VOMITING; CALL A PHYSICIAN; DRINK 1 OR 2
GLASSES OF WA TER. INHALATION:REMOVE TO FRESH AIR, RESTORE
BREATHING, CALL A PHYSICIAN.
Fire Fighting
Flash Point Method:TCC
Flash Point:49.0F,9.4C
Lower Limits:0.9%
Extinguishing Media:FOAM, DRY CHEMICAL, WATER FOG, CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER MAY BE HELPFUL APPLIED AS A SPRAY OR
MIST TO COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. KEEP AWAY FROM HEAT, SPARKS AND OPEN
FLAMES.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES. KEEP PEOPLE AWAY.
REMOVE WITH INERT ABSORBENT. PROVIDE ADEQUATE VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. AVOID CONTACT WITH EYES. AVOID OPEN FLAMES, SPARK SOURCES AND
HIGH TEMPERATURE AREAS. DO NOT TAKE INTERNALLY.
Other Precautions:AVOID CONT W/SKIN. PROVIDE ADEQ VENT. KEEP OUT OF
REACH OF CHILDREN. THIS COATING CNTNS MATLS CLASSIFIED AS NUISANCE
PARTICULATES, FOR EXAMPLE TITANIUM DIOXIDE, CALCIUM CARBONATE, ETC.
(SEE ACGIH TLV LIST, PREFACE & APPENDIX D), (SUPDAT)
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED CANNISTER OR AIR HOSE MASK
IF TLV IS EXCEEDED. IF MATERIAL IS SPRAYED AND TLV IS NOT EXCEEDED
USE DUST MASK (NIOSH/MSHA APPROVED).
Ventilation:VENTILATE WORKING SPACES TO BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
USE CHEM-RESIST APRON/OTHER CLTHG IF NEEDED TO AVOID RPTD OR
(SUPDAT)
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING BATHROOM.
Supplemental Safety and Health
OTHER PRECS:WHICH MAY BE PRESENT AT HAZARDOUS LEVELS ONLY DURING THE
SPRAYING OF THIS COATING, OR SANDING OR ABRADING OF THE DRIED FILM.
OTHER PROT EQUIP:PROLONGED CONTACT.
Chemical Properties
Boiling Pt:B.P. Text:>235F,>113C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:0.84
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:75
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, OPEN FLAMES, SPARKS.
Hazardous Decomposition Products:CARBON MONOXIDE, CO*2 AND SMOKE.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.